Wastewater Sludge Dewatering
-
Payment
-
Origin
China Mainland
-
Minimum Order
5
-
Packing
Pieces
- Contact Now Start Order
- Description
Product Detail
Introduction
Wastewater sludge dewatering belongs to the screw press, it is clog-free and can reduce the sedimentation tank and sludge thickening tank, saving the cost of sewage plant construction. Sludge dewatering use screw and the moving rings to clean itself as clog-free structure, and controlled by the PLC automatically, it's a new technology that can replace the traditional filter press like belt press and frame press, the screw speed is very low, so it cost low power and water consumption in contrast to the centrifuge, it is a cutting edge sludge dewatering machine.
specifications
Model | DS Sludge treating capacity | Sludge treating capacity(m³/h) | |||||
2000mg/L | 5000mg/L | 10000mg/L | 20000mg/L | 25000mg/L | 50000mg/L | ||
HNDL-101 | 3~5 kg/h | ~1.5 | ~0.6 | ~0.5 | ~0.25 | ~0.2 | ~0.1 |
HNDL-131 | 6~10 kg/h | ~3.5 | ~1.4 | ~1.0 | ~0.5 | ~0.4 | ~0.2 |
HNDL-201 | 9~18 kg/h | ~4.5 | ~1.8 | ~1.5 | ~0.7 | ~0.6 | ~0.3 |
HNDL-202 | 20~30 kg/h | ~10.0 | ~4.0 | ~3.0 | ~1.5 | ~1.2 | ~0.6 |
HNDL-301 | 40~60 kg/h | ~19.0 | ~7.6 | ~6.0 | ~3.0 | ~2.4 | ~1.2 |
HNDL-302 | 75~120 kg/h | ~37 | ~15 | ~12 | ~6.0 | ~4.8 | ~2.4 |
HNDL-303 | 115~175 kg/h | ~58 | ~23 | ~18 | ~9.0 | ~7.0 | ~3.5 |
HNDL-351 | 90~120 kg/h | ~33 | ~13 | ~10 | ~5.0 | ~4.0 | ~2.0 |
HNDL-352 | 180~240 kg/h | ~63 | ~25 | ~20 | ~10 | ~8.0 | ~4.0 |
HNDL-353 | 270~360 kg/h | ~93 | ~37 | ~30 | ~15 | ~12 | ~6.0 |
HNDL-401 | 120~160 kg/h | ~48 | ~19 | ~15 | ~7.5 | ~6.0 | ~3.0 |
HNDL-402 | 200~300 kg/h | ~92 | ~37 | ~30 | ~15 | ~12.5 | ~6.0 |
HNDL-403 | 300~450 kg/h | ~142 | ~57 | ~45 | ~22 | ~18 | ~9.0 |
HNDL-404 | 400~600 kg/h | ~182 | ~73 | ~61 | ~30 | ~24 | ~12 |
Dewater Principle
The initial section of dewatering drum is the Thickening Zone, where the solid-liquid separating process takes place and where the filtrate will also be discharged. The pitch of the screw and the gaps between the rings decrease at the end of dewatering drum, hence increasing its internal pressure. At the end, the End Plate further increases the pressure, so as to discharge dry sludge cake.
Technical Advantages
1. Exclusive preconcentration design, applicable sludge concentration of 2000mg/L – 50000mg/L
2. Fixed and moving disks replace filter cloth, self-cleaning, clog-free, easy to handle oily sludge
3. Low running speed, low noise, low power consumption,1/8 of Belt Press and 1/20 of centrifuge
4. Contactless, Wear free Structure Design
5. Fully automatic control, Easy operation and simple maintenance
6. Decrease capital investment, improve treatment effect
Our Company
- Dewatering Screw Press 5 Pieces / (Min. Order)
- Mechanical Grille Bar Screen 5 Pieces / (Min. Order)
- Wastewater Treatment Mechanical Fine Bar Screen 5 Pieces / (Min. Order)
- Rake Bar Screen 5 Pieces / (Min. Order)
- Chemical Dosing Device 5 Pieces / (Min. Order)
- Sludge Dehydrator Machine 5 Pieces / (Min. Order)
- Sludge Press Machine 5 Pieces / (Min. Order)
- Sludge Dewatering Equipment 5 Pieces / (Min. Order)